GC7105B Base Station Analyzer

The Base Station Analyzer JD7105B is the optimal test tool for installation and maintenance of cell sites. The JD7105B contains all the features and capabilities required to perform field testing of cell sites of all wireless technologies, from 2G to 4G.

Key Measurements

• Spectrum Analyzer

• Channel Scanner

• Signal Analyzer

• Interference Analyzer

• Antenna & Cable Analyzer

• Power Measurements

• E1/T1 Analyzer

• Over the Air Analysis

• Auto-measure for multiple carriers

GC7105B Base Station Analyzer

GC7105A Base Station Analyzer

The GC7105A is a multi-purpose base station analyzer for CDMA (IS-95, IS-2000), EV-DO, WCDMA/ HSDPA, GSM, GPRS, EDGE, Mobile WiMAX, and LTE base stations and repeaters.

Key Measurements

• Spectrum Analyzer

• Transmission Analyzer

• Interference Analyzer

• Antenna & Cable Analyzer

• Power Measurement

• E1/T1 Analyzer

• Over the Air Measurements

• Auto-measurement function, for quick and easy configurations and measurements.

JD7108B Signal Analyzer

The Signal Analyzer JD7108B is the ideal test solution for wireless network optimization performing RF conformance testing, interference analysis and performance modulation analysis for cellular technologies, from 2G to 4G.

Key Measurements

• Spectrum Analysis

• Channel Scanner

• Interference Analysis

• Signal Analysis

• Power Measurements

• Over the Air Analysis

• Auto-measure for multiple carriers

GC7106A RF Analyzer

The GC7106A RF Analyzer is a multi-purpose solution for the analysis of RF systems covering all the physical aspects of transmission, reception and interference of RF systems.

Key Measurements

• Spectrum Analyzer

• Interference Analyzer

• Antenna & Cable Analyzer

• Power Measurement

GC7106A RF Analyzer

GC725A Cable & Antenna Analyzer

The majority of the operation problems at base stations are caused by the antenna system, cable and connectors. It is essential to have the right test & measurement instrument to commission and service cell sites and the GC725A Cable and Antenna Analyzer is the ideal solution.

Key Measurements

• Frequency Range - 25MHz to 4GHz

• VSWR - Voltage Standing Wave Ratio

• DTF - Distance to Fault

• Cable Loss Measurement

• Instertion Gain/Loss Measurement

• RF Power Measurements

GC723A and GC724B Cable & Antenna Analyzer

The majority of the operation problems at base stations are caused by the antenna system, cable and connectors. It is essential to have the right test & measurement instrument to commission and service cell sites and the GC724B Cable and Antenna Analyzer is the ideal solution.

Key Measurements

• Frequency Range: 100MHz to 2.7GHz (GC723A) and 25MHz to 4GHz (GC724B)

• VSWR: Voltage Standing Wave Ratio

• DTF: Distance to Fault

• Cable Loss Measurement

• RF Power Measurements

GC730 Series Power Sensors

The most versatile power sensors for either in-service with the Directional power sensor or out-of-service with the Terminating power sensor. The GC730 power sensors can operate in conjunction with any of GenComm's instruments or as a standalone solution driven by a PC.

Key Measurements - Directional Power Sensor

• Frequency Range: 300MHz to 3800GHz

• Average Power: 0.15W to 150W

• Peak Power: 4 to 400W

Key Measurements - Terminating Power Sensor

• Frequency Range: 20MHz to 3800GHz

• Average Power: 1μW to 100mW

GC730 Power Sensor Series - Datasheet

Power Measurements - Overview