|
What is the latest firmware available for the GC7106A?
The latest firmware of the
GC7106A is 3.120
Which power sensors are compatible with the GC7106A?
The power sensors compatible
with the GC7106A are the following:
-
GC731A - Directional
Power Sensor with a frequency range of 300 to 3800
MHz, makes average power measurements from 150mW to
150W and peak power measurements from 4W to 400W.
Additional information can be found on
GC730 Series Power Sensors.
-
GC732A - Terminating
Power Sensor with a frequency range of 20 to 3800
MHz, makes average power measurements from 1μW to
100mW. Additional information can be found on
GC730 Series Power Sensors.
-
GC733A - Directional
Power Sensor with a frequency range of 150 to 3500
MHz, makes average power measurements from 250mW to
20W and peak power measurements from 250mW to 20W.
Additional information can be found on
GC730 Series Power Sensors.
Can I use other calibrator kits (open, short, load) with
the GC7106A?
Yes, other calibrators can
be used with the GC7106A, for the cable and antenna
measurements.
What is the calibration cycle of the GC7106A?
The recommended RF
calibration cycle of the GC7106A is one year.
What is
the standard warranty period?
The standard warranty
period of the GC7105A is two years from the date of
shipment.
Is the RF calibration
included in the warranty period?
The RF calibration is not
included in the warranty period, since it is not a
malfunction of the instrument, but a regular procedure
of any spectrum based instrument. |
